1. Meet the requirements of night operation
Not only at night, because many visual operations belong to indoor operation, artificial lighting is required even in the daytime, and its lighting effect can not be completely comparable with natural lighting. If the lighting level is insufficient and the visual characteristics are insufficient, the error rate in operation will increase or the speed will decrease;

Therefore, it is necessary to use high illumination to ensure better visual characteristics. In terms of visual effect of lighting, lamps shall be arranged through reasonable lighting calculation according to corresponding lighting standards and the needs of the actual site, so as to ensure a certain illuminance level and reduce the decline of work efficiency caused by insufficient lighting. In a relatively dark environment, a light source with a certain color rendering index is guaranteed to improve the effective light efficiency.

2. Meet the needs of brightness and give people a sense of visual comfort
The influence of warehouse ceiling and wall on lighting effect is related to room area. The ceiling of a small room accounts for a small proportion in the field of vision and has little influence on the contrast, while the wall accounts for a large proportion in the field of vision and has a great influence on the contrast. Therefore, the wall with high reflectance and the ceiling with low reflectance can be used in a small room. Conversely, large rooms use high reflectance ceilings and low reflectance walls. Through effective lighting arrangement, moderate and uniform illuminance can be achieved. The lighting shall be bright and clear, without glare and ghosting.


The traditional sodium lamp needs preheating to start. If the power is cut off in the middle, it needs to be cooled and preheated before it can be started; The current harmonic of sodium lamp is large; Make a harsh sound of electric current; The surface temperature of the bulb is up to 360 ℃, and the ambient temperature increases obviously under the sodium lamp; If the color rendering is low, the color under the light deviates and the visual effect is poor; Stroboscopic effect is a serious hazard. Small objects are blurred by direct observation with the naked eye, the light is dazzling and the environment is depressed. Obviously, it is impossible to work comfortably under the sodium lamp, which reduces the work efficiency.

3. Meet the requirements of energy conservation, consumption reduction, low carbon and environmental protection
As we all know, energy consumption is mainly concentrated in industry. According to relevant media reports, industrial energy consumption accounted for 63.9% of the final energy consumption last year. Reducing industrial energy consumption should be the top priority in energy conservation and consumption reduction. Vigorously promoting the application of energy-saving lighting products is the general trend.


The energy situation in various countries tends to be tense, and the energy shortage has brought a great impact to the manufacturing industry known for its high energy consumption. It is a general trend for manufacturing enterprises to take the road of energy conservation. The enterprise has more than 20% energy-saving potential. Due to the lack of energy-saving transformation funds and energy-saving consulting services, the heavy energy consumption cost greatly increases the cost of the enterprise, which not only shortens the power supply, but also pollutes our living environment. Taking the traditional sodium lamp as an example, the traditional lamps have some disadvantages, such as low light efficiency, insufficient illumination, poor safety, high energy consumption, low color rendering, unable to start when the voltage is unstable, frequent replacement, heavy workload, large thermal benefit and so on.

4. Lamps for warehouse lighting
According to the height of the warehouse building, it is recommended that the LED Highbay light, LED Floodlight, LED Streetlight and LED Tri proof Battens which produced by Shenzhen zisteled Technology Co Ltd can be installed in various application; It is recommended to install 60-240W LED Highbay on the middle and high ceilings. The higher the height, the Higher wattage and the smaller the luminous angle can be selected


The efficiency of LED high-power LED Highbay,LED Floodlights and LED Streetlight etc produced by Shenzhen Zisteled, Achieved more than 180LM / W, which has obvious advantages over traditional metal halide lamps and high-pressure sodium lamps. The energy-saving rate is more than 75%, the service life is almost 10 times longer than traditional lamps, and there is no light pollution. It can provide sufficient and uniform lighting for industrial lighting places such as warehouses, workshops and factories. It can provide a good and comfortable lighting environment for long-time visual workers; And it can appropriately alleviate the visual fatigue of the operator. Unique light distribution technology, uniform light spot. Good color rendering, close to natural light, more realistic presentation of the color of the real object. Various light colors are optional, which can meet the needs of different environments, eliminate the depression caused by the high or low color temperature of traditional lamps, make the vision more comfortable and improve the work efficiency of workers. In addition, the LED Highbay light, LED Streetlight and LED Floodlight etc choose famous brands such as meanwell and inventronics and Lumileds and Samsung lamp beads, with wide applicable voltage (AC100V-240V), which overcomes the power grid, noise pollution and light instability caused by ballasts. No flicker and noise, no stroboscopic hazard, small objects are real and clear by naked eye observation, the lighting environment is bright and comfortable, and the reaction and fatigue to the eyes during work are avoided. Strive to provide better LED lighting source for warehouse and operation lighting.